Astell & Kern SEM2 Interchangeable All-in-One Module For The SE180

• Popularity - 2935 views, 419.3 views per day, 7 days on eBay. Super high amount of views. 96 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Powered by<br>Frooition<br>Payment & Returns<br>Support<br>Newsletter<br>Home Audio<br>Car Electronics<br>Televisions and Video<br>Portable Electronics<br>Furniture<br>Sale<br>Astell & Kern SEM2 Interchangeable All-in-One Module for the SE180<br>Product ID #: SEM2MS<br>AUTHORIZED DEALER<br>Product Information<br>Product Information<br>About Us<br>Payment<br>Returns<br>Shipping<br>Product Information<br>*For Sale In US Only*<br>Shape Your Sound With SEM2<br>SEM2 is an Interchangeable All-in-One module for the SE180. Shape your Sound with the Asahi Kasei AK4497EQ Dual DAC SEM2 module. The SEM2 module allows you to give your SE180 a different sound than the bundled module. The SEM2 supports up to 32bit/768kHz bit-to-bit playback and Native DSD512.<br>Next-Generation Advanced AMP Technology<br>Next-generation AMP technology is also applied in the SEM2 all-in-one module. From the selection of OP-AMP parts to circuit design board layout and tuning everything has been completely redesigned to produce the best sound.<br>Even with a high output the signal-to-noise (SNR) one of the important measurements of audio performance boasts an amazing 127dB (based on AK4497EQ Dual Balanced High Gain).<br>Circuit Separation Structure of Main Body and Module<br>By physically separating the main body from the All-in-One module it completely blocks power and RF noise that may occur from the main body.  This creates an independent structure that prevents noise from interfering with music playback.<br>Balanced and unbalanced signals are separated for each channel to provide the best possible sound through independent circuit design without interference.<br>Astell&Kern Audio Technology Forms the  TERATON ALPHA Sound Solution<br>TERATON ALPHA is AK's ultimate Sound Solution to produce audio playback that is close to the original sound through the audio output interface by use of effective power noise removal efficient power management and amplification with minimal distortion. TERATON ALPHA features Astell&Kern's patented technologies which are the result of tens of thousands of hours of continuous research and development to produce sound close to the original sound the artist and producer intended.<br>Specifications<br>General Specifications<br>Product Name: SEM2<br>Mode: PAP12<br>Body Material: Aluminum Stainless Steel Polycarbonate<br>Body Color: Moon Silver<br>Sample Rate:<br>PCM: 8kHz ~ 768kHz (8/16/24/32bits per Sample)<br>DSD Native: DSD64 (1bit 2.8MHz) Stereo / DSD128 (1bit 5.6MHz) Stereo / DSD256 (1bit 11.2MHz) Stereo<br>Output: Unbalanced Out (3.5mm) Balanced Out (2.5mm only 4-pole supported / 4.4mm only 5-pole supported)<br>Output Level:<br>[Normal Gain] Unbalanced 2Vrms / Balanced 4Vrms (Condition No Load)<br>[High Gain] Unbalanced 3Vrms / Balanced 6Vrms (Condition No Load)<br>DAC: AKM AK4497EQ x2 (Dual DAC)<br>Decoding: Support up to 32bit / 786kHz Bit-to-Bit playback<br>Dimensions (W x H x D): 3.03" x 2.99" x 0.78"<br>Weight: 3.53 oz<br>Operating Temperature: 32°F ~ 104°F<br>Playback Time: about 10.5 hours (FLAC 16bit 44.1kHz Vol.50 LCD Off)<br>Audio Performance<br>Frequency Response:<br>±0.07dB (Condition: 20Hz ~ 20kHz) Unbalanced / ±0.06dB (Condition: 20kHz ~ 20kHz) Balanced<br>±0.68dB (Condition: 20Hz ~ 70kHz) Unbalanced / ±0.67dB (Condition: 20kHz ~ 70kHz) Balanced<br>Signal to Noise Ratio:<br>[Normal Gain] 122dB @ 1kHz Unbalanced / 124dB @ 1kHz Balanced<br>[High Gain] 125dB @ 1kHz Unbalanced / 127dB @ 1kHz Balanced<br>Crosstalk:<br>[Normal Gain] -138dB @ 1kHz Unbalanced / -145dB @1kHz Balanced<br>[High Gain] -138dB @ 1kHz Unbalanced / -147dB @ 1kHz Balanced<br>THD+N:<br>[Normal Gain] 0.0006% @ 1kHz Unbalanced / 0.0005% @ 1kHz Balanced<br>[High Gain] 0.0008% @ 1kHz Unbalanced / 0.0006% @ 1kHz Balanced<br>IMD SMPTE: 0.0002% 800Hz 10kHz (4:1) Unbalanced / 0.0002% 800Hz 10kHz (4:1) Balanced<br>Output Impedance: 3.5mm (1ohm) / 2.5mm (1.5ohm) / 4.4mm (1.5ohm)<br>About Us<br>About Us<br>World Wide Stereo:<